JZ to CD/Jk Swap Components

Adapter Plate:
Bolt your Lexus 1jz/2jz engine to the CD/JK transmissions (used in the 350z and 370z). Plate is 6061-T6 aluminum machined in-house. Bolts are included. Requires our custom POP shop flywheel as you will NOT need to cut your bell housing.

Flywheel:
Use this custom designed flywheel with our adapter plate that doesn’t require you to cut your bell housing or use spacers. Uses standard 350/370z clutch and throw out bearing, however all kits aren't made identical. Some disks and diaphragms are taller/ shorter by millimeters; This can result in some TOB chatter. The kit was designed around Clutch Masters kits so it is best to run them. Flywheel bolts included

Clutch:
Our recommended Clutch Masters Sintered iron clutch kit is good for 650tq safely. Includes clutch tool, roller bearing and throw out bearing for those who are external slave. Ceramic clutch option is available as well. That one is rated safely for 500tq with room for more. If you are going to be more than 600whp, We'd recommend going twin disk.

**When placing order please specify if you have an internal or external bellhousing.
Internal is found in 350z HR and 370z (07-up)
External is found in most 350z (03-06)